cool, heavy, mean, yet pretty and spacey at the same time. Not what I needed for that song, but something I will definitely, definitely play with in the future. Reamping is a practice commonly done in modern recording studios where clean DI guitar recording gets fed through a Reamp box to convert it into a signal ideal. curlybob43 Regular Posts: 76 Joined: Thu 9:50 am. The source impedance of a line level output is in the range of about. Your average guitar pickup has a source impedance of roughly 40k, and the load/input impedance of your amplifier is usually 1M (illion). Im boosting the signal on the line out from my interface into guitar pedals and other outboard gear. The basic formula to figure out the of signal actually transferred to your source is: load impedance/ (load impedance + source impedance). But since the AxeFX 3 can handle line-level inputs no problem, I dont think one is even necessary. Has anyone got any recommendations for a cheap reamp box. but had a nice smoothness to the distortion, and the Peavey's preamp sort of crushed/compressed the effects from the Line6 plugin. The way I understand it is you need the Reamp box to take the lower impedance line-out signal from your interface and convert it to a high-impedance signal that the front of your amp expects. I gotta say, it was one really crazy, hellacious metal kind of sound. So the Marshall plexi emulation with chorus, delay and reverb went into the Peavey with the gain cranked for some grit and the spring reverb at about 70%. Bypassed the plugin so the untreated sound was going to the amp, mic'd it back in with an ADK A51, which is a warm & smooth mic.ĭid the same for a second track, but. I had recorded a Strat straight into ProTools and mixed a song using Line6 emulations. Amp near my mixing desk, speaker isolated in a distant closet - kept the high-Z cable runs down). Worked just fine (with a 12' cable that is. Go from your re-amp box to the guitar amp. ![]() All you need to do is: Hook up an output other than the main 1-2 from your interface. Mackie 1202, a couple of synths/drum machines, and a second hand Eventide H9 would be an AWESOME setup. Or buy effects that work with line level for starters. I followed Craig Anderton's re-amping advice and skipped buying any more gear for it.Ĭreated a send in ProTools, assigned it to output three of my hardware, dropped the fader all the way down, plugged it into a Peavey Classic 30 with a vintage cab.īrought the fader up slow until the amp seemed about the same level as an actual guitar. Now that everything is ready for re-amping we have to actually hook everything up. The proper way to do it Line - Guitar Pedal - Line is Reamp - Pedal - DI, for the best sound quality, BUT you could also get very usable results just with a mixer too.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |